In many applications the use of the CableHorn™ system can eliminate the need for cable trays to be installed. Cables may be added or removed after the CableHorn™ is installed. When used in conjunction with the PulsaLift™ pole system, CableHorns™ may be installed from the ground without the need for ladders or scissor lifts.
Double CableHorn™; 16 cables, 3 x 1.5mm2 maximum Single CableHorn™: 8 cables, 3 x 1.5mm2 maximum.
Between 0.60m and 1.50m
High impact modified Pa66 Halogen free polypropylene.
Fire Resistance Properties
Incandescent wire test (IEC 695): 650 °C UL94 HB (ISO 1210): 100 mm/min
Low Temperature Tests
No breakage at 0 °C
TUV certificate ISO 9001
Single CableHorn™: Length 137mm. Double CableHorn™: Length 228mm
Double CableHorn™: 19.5 x 24.3mm Single CableHorn™: 19.5 x 38.5mm.
FEATURES & BENEFITS
Designed for use with electrical, data and communication cables. Replaces the need for cable tray and catinary wire. Clips directly onto the CableMaster™ Pin Guide allowing one-handed operation. Can be used with the PulsaLift™ Pole to fix from the ground. Add or remove cables as required. In-built energy absorber for perfect embedment. Large fixing base for better stability. Flexibility in installation-vertical, horizontal, overhead. Optional plug and screw installation.
TRADES & APPLICATIONS
1. Simply clip the CableHorn™ to the tool pin 2. Press against the substrate (5kg to actuate the tool) press the trigger to fix. 3. Install the cable simply by lifting the edge of the CableHorn™ .
TECHNICAL DATA & DOCUMENTS
*NOTE: Test concluded when clip pulled over pin head or pin failed. Job-site testing may be required to determine actual achievable job-site values. Results have been achieved with a CableMaster™ tool set at minimum overdrive setting. Accessories failing to fix correctly should be removed and a new fixing set away from any spalled concrete. Tension loads provided are for static load situations only. Values represent a minimum factor of safety of 3:1 on the lowest test results achieved. Minimum edge distance 75mm, minimum spacing between fixings 50mm. Tension loads are per fixing, however a minimum of 3 fixings per fastening unit should be used.